BMTLD - SP-30 SOLDERING PASTE FLUX

Product Identification

Product ID:SP-30 SOLDERING PASTE FLUX
MSDS Date:08/01/1989
FSC:3439
NIIN:00-145-9132
MSDS Number: BMTLD

Responsible Party
KESTER SOLDER DIV,LITTON SYSTEMS INC
515 E TOUHY
DES PLAINES, IL 60018-2675
US

Emergency Phone: 708-297-1600

Info Phone: 708-297-1600

Cage: 75297

Contractor
KESTER SOLDER DIVISION OF LITTON SYSTEMS, INC.
DES PLAINES, IL 60018 US

Telephone: 847-297-1600

Cage: 75297

Ingredients

PETROLATUM

Fraction By Weight: 65%


ZINC CHLORIDE (SARA III)

CAS: 7646-85-7

RTECS: ZH1400000

Fraction By Weight: 24%

OSHA PEL 1 MG/M3/2 STEL

ACGIH TLV: 1 MG/M3/2STEL FUME93

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


NON HAZARDOUS INGREDIENTS

Fraction By Weight: BALANCE

Hazards

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHALATION OF FUMES FORM
SOLDERING MAY CAUSE RESPIRATORY IRRITATION. CONTACT WITH SKIN OR
EYES MAY CAUSE IRRITATION, EYE BURNS. NO HEALTH EFFECTS NOTED IF
SWALLOWED. CHRONIC: NONE SPECIFIED BY MANUFACTURER.
Explanation of Carcinogenicity:NO INGREDIENT OF A CONCENTRATION OF 0.1%
OR GREATER IS LISTED AS A CARCINOGEN OR SUSPECTED CARCINOGEN.
Effects of Overexposure:INHALATION: COUGHING, WHEEZING, SHORTNESS OF
BREATH. EYES: REDNESS, TEARING, BLURRED VISION. SKIN: REDNESS,
RASH, ITCHING. INGESTION: NONE NOTED.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INHALATION: REMOVE PERSON TO FRESH AIR. RESUSCITATE IF
NEEDED. GET MEDICAL AID IF SYMPTOMS PERSIST. EYES: FLUSH WITH WATER
FOR 15 MINUTES. GET MEDICAL AID. SKIN: WASH WITH SOAP AND WATER.
INGESTION: D O NOT INDUCE VOMITING UNLESS ORDERED BYA PHYSICIAN.
GET IMMEDIATE MEDICAL AID.

Fire Fighting

Flash Point:430F,221C
Autoignition Temp:Autoignition Temp Text:720F
Extinguishing Media:FOAM, CARBON DIOXIDE, DRY CHEMICAL
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS AND
FULL PROTECTIVE GEAR.
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:NONE SPECIFIED BY MANUFACTURER. SCOOP OR SWEEP
UP AND PLACE IN A CONTAINER FOR LATER DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE IN A COOL, DRY, WELL VENTILATED
AREA.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:NONE NORMALLY REQUIRED.
Ventilation:USE ADEQUATE MECHANICAL VENTILATION.
Protective Gloves:RUBBER IF PROLONGED OR REPEATED CONTACT
Eye Protection:SAFETY GLASSES IF SPLASHING LIKELY
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:WASH HANDS AFTER USE AND BEFORE EATING,
DRINKING, OR SMOKING.
Supplemental Safety and Health
NONE

Chemical Properties

HCC:N1
Melt/Freeze Pt:M.P/F.P Text:120F,49C
Spec Gravity:1.05 (WATER=1)
Solubility in Water:APPRECIABLE
Appearance and Odor:LIGHT AMBER COLORED PASTE WITH LITTLE OR NO ODOR
Percent Volatiles by Volume:8

Stability

Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:HYDROGEN CHLORIDE

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.